·610·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
(V.)[ch].MPA.TYPLSCRW.xn
(V.)[ch].MPA.TYPLSCRW.sn
(V.)[ch].SP.TYPLSCRW.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Type of compensation (type of coordinates).
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.BIDIR.xn
(V.)[ch].MPA.BIDIR.sn
(V.)[ch].SP.BIDIR.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Bi-directional compensation.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA .TYPLSCRW.Z Z axis.
V.MPA .TYPLSCRW.S Spindle S.
V.SP.TYPLSCRW.S Spindle S.
V.SP.TYPLSCRW Master spindle.
V.MPA .TYPLSCRW.4 Axis or spindle with logic number ·4·.
V.[2].MPA.TYPLSCRW.1 Axis with index ·1· in the channel ·2·.
V.SP.TYPLSCRW.2 Spindle with index ·2· in the system.
V.[2].SP.TYPLS CRW.1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0 Compensation is applied using real coordinates.
1 Compensation is applied using theoretical coordinates.
V.MPA .BIDIR.Z Z axis.
V.MPA .BIDIR.S Spindle S.
V.SP.BIDIR.S Spindle S.
V.SP.BIDIR Master spindle.
V.MPA .BIDIR.4 Axis or spindle with logic number ·4·.
V.[2].MPA.BIDIR.1 Axis with index ·1· in the channel ·2·.
V.SP.BIDIR.2 Spindle with index ·2· in the system.
V.[2].SP.BIDIR.1 Spindle with index ·1· in the channel ·2·.
To Next Page
Loading...
