Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·611·
Variables related to axis and spindle machine parameters.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.REFNEED.xn
(V.)[ch].MPA.REFNEED.sn
(V.)[ch].SP.REFNEED.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. The axis must be homed in order to apply the compensation.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.POSITION[pt].xn
(V.)[ch].MPA.POSITION[pt].sn
(V.)[ch].SP.POSITION[pt].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Master axis position for point [pt]
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
·pt· Point in the table.
Value. Meaning.
0No.
1Yes.
V.MPA.REFNEED.Z Z axis.
V.MPA.REFNEED.S Spindle S.
V.SP.REFNEED.S Spindle S.
V.SP.REFNEED Master spindle.
V.MPA.REFNEED.4 Axis or spindle with logic number ·4·.
V.[2].MPA.REFNEED.1 Axis with index ·1· in the channel ·2·.
V.SP.REFNEED.2 Spindle with index ·2· in the system.
V.[2].SP.REFNEED.1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0No.
1Yes.
V.MPA.POSITION[13].Z Z axis.
V.MPA.POSITION[13].S Spindle S.
V.SP.POSITION[13].S Spindle S.
V.SP.POSITION[13] Master spindle.
To Next Page
Loading...
