Fagor CNC 8065 - Page 616

·616·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
(V.)[ch].MPA.DEFAULTSET.xn
(V.)[ch].MPA.DEFAULTSET.sn
(V.)[ch].SP.DEFAULTSET.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Default parameter set on power-up.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.DEFAULTSET.Z Z axis.
V.MPA.DEFAULTSET.S Spindle S.
V.SP.DEFAULTSET.S Spindle S.
V.SP.DEFAULTSET Master spindle.
V.MPA.DEFAULTSET.4 Axis or spindle with logic number ·4·.
V.[2].MPA.DEFAULTSET.1 Axis with index ·1· in the channel ·2·.
V.SP.DEFAULTSET.2 Spindle with index ·2· in the system.
V.[2].SP.DEFAULTSET.1 Spindle with index ·1· in the channel ·2·.