Fagor CNC 8065 - Page 626

·626·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the sets of machine parameters.
(V.)[ch].MPA.ACTBAKAN[set].xn
(V.)[ch].MPA.ACTBAKAN[set].sn
(V.)[ch].SP.ACTBAKAN[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Application of the additional velocity command pulse.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.PEAKDISP[set].xn
(V.)[ch].MPA.PEAKDISP[set].sn
(V.)[ch].SP.PEAKDISP[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Backlash peak cuttoff distance.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.ACTBAKAN[3].Z Z axis.
V.MPA.ACTBAKAN[3].S Spindle S.
V.SP.ACTBAKAN[3].S Spindle S.
V.SP.ACTBAKAN[3] Master spindle.
V.MPA.ACTBAKAN[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.ACTBAKAN[3].1 Axis with index ·1· in the channel ·2·.
V.SP.ACTBAKAN[3].2 Spindle with index ·2· in the system.
V.[2].SP.ACTBA KAN[3].1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0 In G02 / G03 positioning.
1Always.
V.MPA.PEAKDISP[3].Z Z axis.
V.MPA.PEAKDISP[3].S Spindle S.
V.SP.PEAKDISP[3].S Spindle S.
V.SP.PEAKDISP[3] Master spindle.
V.MPA.PEAKDISP[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.PEAKDISP[3].1 Axis with index ·1· in the channel ·2·.
V.SP.PEAKDISP[3].2 Spindle with index ·2· in the system.
V.[2].SP.PEAKDISP[3].1 Spindle with index ·1· in the channel ·2·.