Fagor CNC 8065 - Page 625

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·625·
Variables related to the sets of machine parameters.
BACKLASH COMPENSATION IN MOVEMENT REVERSALS
WITH AN ADDITIONAL COMMAND PULSE.
(V.)[ch].MPA.BAKANOUT[set].xn
(V.)[ch].MPA.BAKANOUT[set].sn
(V.)[ch].SP.BAKANOUT[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified from the environment of the oscilloscope and setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Additional velocity command pulse.
• With digital drives, the additional velocity command is given in rpm.
• With an analog drive, the additional velocity command is given in units of the D/A
converter with an integer within ± 32767. - 10 V for a value of -32767 and +10V for a value
of 32767.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.BAKTIME[set].xn
(V.)[ch].MPA.BAKTIME[set].sn
(V.)[ch].SP.BAKTIME[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified from the environment of the oscilloscope and setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Duration of the additional velocity command pulse.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.BAKANOUT[3].Z Z axis.
V.MPA.BAKANOUT[3].S Spindle S.
V.SP.BAKANOUT[3].S Spindle S.
V.SP.BAKANOUT[3] Master spindle.
V.MPA.BAKANOUT[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.BAKANOUT[3].1 Axis with index ·1· in the channel ·2·.
V.SP.BAKANOUT[3].2 Spindle with index ·2· in the system.
V.[2].SP.BAKANOUT[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA.BAKTIME[3].Z Z axis.
V.MPA.BAKTIME[3].S Spindle S.
V.SP.BAKTIME[3].S Spindle S.
V.SP.BAKTIME[3] Master spindle.
V.MPA.BAKTIME[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.BAKTIME[3].1 Axis with index ·1· in the channel ·2·.
V.SP.BAKTIME[3].2 Spindle with index ·2· in the system.
V.[2].SP.BAKTIME[3].1 Spindle with index ·1· in the channel ·2·.