Fagor CNC 8065 - Page 674

·674·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to machine parameters for JOG mode.
Syntax.
·uk· User key number.
Values of the variable.
This variable returns one of the following values.
Remarks.
The logic number of the axes is determined by the order in which the axes have been defined
in the machine parameter table. The first axis of the table will be logic axis -1- and so on.
(V.)MPMAN.HBLS
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
This parameter indicates whether there is a portable panel HBLS connected to the CNC
through the serial line or not.
Values of the variable.
This variable returns one of the following values.
JOG-PANEL LCD-10K
V.MPMAN.USERKEYDEF[7] User key ·7· of first keyboard.
V.MPMAN.USERKEY3DEF[7] User key ·7· of third keyboard.
Value. Meaning.
0 The key has no function assigned to it.
1 ·· 16 The key is assigned to the logic axis 1, 2, ··, 16 for movements in the positive direction.
-1 ·· -16 The key is assigned to the logic axis 1, 2, ··, 16 for movements in the negative
direction.
101 ·· 116 The key is assigned to the logic axis 1, 2, ··, 16.
300 The key is assigned to the rapid movement.
301 The key is assigned to the movement in the positive direction.
302 The key is assigned to the movement in the negative direction.
V.MPMAN.HBLS
Value. Meaning.
0No.
1Yes.
12 15 16
J
O
G
K
E
Y
S
12
34
56
J
O
G
K
E
Y
S