Fagor CNC 8065 - Page 678

·678·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to kinematic machine parameters.
(V.)MPK.TDATAkin[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Kinematics [kin]. Value of parameter TDATA [nb].
Syntax.
·kin· Number of the kinematics.
·nb· Parameter number.
(V.)MPK.TDATA_Ikin[nb]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Kinematics [kin]. Value of parameter TDATA_I [nb].
Syntax.
·kin· Number of the kinematics.
·nb· Parameter number.
(V.)MPK.NKINAX[kin]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Kinematics [kin]. Number of axes of the kinematics.
Syntax.
·kin· Number of the kinematics.
(V.)MPK.PARAM_D_SIZE[kin]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Kinematics [kin]. Number of parameters in decimal format
Syntax.
·kin· Number of the kinematics.
(V.)MPK.PARAM_I_SIZE[kin]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Kinematics [kin]. Number of parameters in integer format.
42 "C" axis. Machining on the face of the part when ALIGNC = NO.
43 "C" axis. Machining of the turning side of the part.
100 ·· 105 OEM Kinematics.
V.MPK.TDATA2[34] Kinematics ·2·. Value of parameter TDATA34.
V.MPK.TDATA2[23] Kinematics ·2·. Value of parameter TDATA_I23.
V.MPK.NKINAX[2] Kinematics ·2·.
V.MPK.PARAM_D_SIZE[2] Kinematics ·2·.
Value. Meaning.