Fagor CNC 8065 - Page 762

·762·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to loop adjustment.
(V.)[ch].A.PREVPOSINC.xn
(V.)[ch].A.PREVPOSINC.sn
(V.)[ch].SP.PREVPOSINC.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Real position increment of the previous sampling period.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
FINE ADJUSTMENT OF FEEDRATE, ACCELERATION AND
JERK.
(V.)[ch].A.TFEED.xn
(V.)[ch].A.TFEED.sn
(V.)[ch].SP.TFEED.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Instantaneous theoretical speed value at the input of the position loop.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.[2].A.TPOSINC.1 Axis with index ·1· in the channel ·2·.
V.SP.TPOSINC.2 Spindle with index ·2· in the system.
V.[2].SP.TPOSINC.1 Spindle with index ·1· in the channel ·2·.
V.A.PREVPOSINC.Z Z axis.
V.A.PREVPOSINC.S Spindle S.
V.SP.PREVPOSINC.S Spindle S.
V.SP.PREVPOSINC Master spindle.
V.A.PREVPOSINC.4 Axis or spindle with logic number ·4·.
V.[2].A.PREVPOSINC.1 Axis with index ·1· in the channel ·2·.
V.SP.PREVPOSINC.2 Spindle with index ·2· in the system.
V.[2].SP.PREVPOSINC.1 Spindle with index ·1· in the channel ·2·.
V.A.TFEED.Z Z axis.
V.A.TFEED.S Spindle S.
V.SP.TFEED.S Spindle S.
V.SP.TFEED Master spindle.
V.A.TFEED.4 Axis or spindle with logic number ·4·.
V.[2].A.TFEED.1 Axis with index ·1· in the channel ·2·.
V.SP.TFEED.2 Spindle with index ·2· in the system.
V.[2].SP.TFEED.1 Spindle with index ·1· in the channel ·2·.