Fagor CNC 8065 - Page 820

·820·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the active tool and to the next one.
·xn· Name, logic number or index of the axis.
Remarks.
The value of these variables depends on the active units (radius or diameter). In order for
these variables to return the value in diameter, these units must be enabled by machine
parameter and function G151 must be active.
(V.)[ch].TM.TOFL1
(V.)[ch].TM.TOFL2
(V.)[ch].TM.TOFL3
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Active offset of the active tool. Tool length offset on the first axes of the channel.
On turning tools, it is used to define the tool length in each axis. On milling tools, it is used
to define the tool position when using a tool holder or an intermediate tooling.
Syntax.
·ch· Channel number.
(V.)[ch].TM.TOFLW1
(V.)[ch].TM.TOFLW2
(V.)[ch].TM.TOFLW3
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Active offset of the active tool. Tool length offset wear on the first axes of the channel.
Syntax.
·ch· Channel number.
Remarks.
The value of these variables depends on the active units (radius or diameter). In order for
these variables to return the value in diameter, these units must be enabled by machine
parameter and function G151 must be active.
V.TM.TOFLW[3].Z Tool offset ·3·. Z axis.
V.TM.TOFLW[3].4 Tool offset ·3·. Axis with logic number ·4·.
V.[2].TM.TOFLW[3].1 Tool offset ·3·. Axis with index ·1· in the channel ·2·.
V.[2].TM.TOFL1 Channel ·2·. First axis of the channel.
V.[2].TM.TOFL2 Channel ·2·. Second axis of the channel.
V.[2].TM.TOFL3 Channel ·2·. Third axis of the channel.
V.[2].TM.TOFLW1 Channel ·2·. First axis of the channel.
V.[2].TM.TOFLW2 Channel ·2·. Second axis of the channel.
V.[2].TM.TOFLW3 Channel ·2·. Third axis of the channel.