Fagor CNC 8065 - Page 876

·876·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the independent axes.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index in the channel of the axis.
SYNCHRONIZATION MOVEMENT.
(V.)[ch].A.SYNCTOUT.xn
(V.)[ch].A.SYNCTOUT.sn
(V.)[ch].SP.SYNCTOUT.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Maximum time to establish synchronism.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.SYNCVELxn
(V.)[ch].A.SYNCVEL.sn
(V.)[ch].A.SYNCVEL.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Synchronization speed.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.IORG.Z Z axis.
V.A.IORG.4 Axis with logic number ·4·.
V.[2].A.IORG.1 Axis with index ·1· in the channel ·2·.
V.A.SYNCTOUT.Z Z axis.
V.A.SYNCTOUT.S Spindle S.
V.SP.SYNCTOU T.S Spindle S.
V.SP.SYNCTOUT Master spindle.
V.A.SYNCTOUT.4 Axis or spindle with logic number ·4·.
V.[2].A.SYNCTOUT.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCTOU T.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCTOUT.1 Spindle with index ·1· in the channel ·2·.
V.A.SYNCVEL.Z Z axis.
V.A.SYNCVEL.S Spindle S.
V.SP.SYNCVEL.S Spindle S.
V.SP.SYNCVEL Master spindle.
V.A.SYNCVEL.4 Axis or spindle with logic number ·4·.
V.[2].A.SYNCVEL.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCVEL.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCVEL.1 Spindle with index ·1· in the channel ·2·.