Fagor CNC 8065 - Page 877

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·877·
Variables related to the independent axes.
(V.)[ch].A.SYNCPOSW.xn
(V.)[ch].A.SYNCPOSW.sn
(V.)[ch].SP.SYNCPOSW.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Maximum position difference to start correcting it.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.SYNCVELW.xn
(V.)[ch].A.SYNCVELW.sn
(V.)[ch].A.SYNCVELW.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Maximum velocity difference to start correcting it.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.SYNCPOSOFF.xn
(V.)[ch].A.SYNCPOSOFF.sn
(V.)[ch].SP.SYNCPOSOFF.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Position offset for synchronization.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.A.SYNCPOSW.Z Z axis.
V.A.SYNCPOSW.S Spindle S.
V.SP.SYNCPOSW.S Spindle S.
V.SP.SYNCPOSW Master spindle.
V.A.SYNCPOSW.4 Axis or spindle with logic number ·4·.
V.[2].A.SYNCPOSW.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCPOSW.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCPOSW.1 Spindle with index ·1· in the channel ·2·.
V.A.SYNCVELW.Z Z axis.
V.A.SYNCVELW.S Spindle S.
V.SP.SYNCVELW.S Spindle S.
V.SP.SYNCVELW Master spindle.
V.A.SYNCVELW.4 Axis or spindle with logic number ·4·.
V.[2].A.SYNCVELW.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCVELW.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCVELW.1 Spindle with index ·1· in the channel ·2·.