FEC Handheld Nutrunner HFC3000 - Page 13

Revision History
Revision
date
Manual No.
Content of revision
Page
Jan, 2017
HFC3000E-HW-1
1
st
Edition(SupportingV1.000) – Release from DDK (S0140185-C)
Jan. 2019
HFC3000E-HW-2
2
nd
Edition (supporting V1.130) – Release from DDK (S0140185-G)
English updated
Majority
June 2019
HFC3000E-HW-2
Added note concerning powering on with P-OFF remaining in display
5-3, 6-7
Manual Numbering Convention
HFC3000E-HW-1
HW = Hardware Operation Manual
SW = Software Manual
DSP1500 = Servo Press
AFC3000 = Nutrunner
FUSION = DC Hand Tool
HFC3000 = DC Hand Tool
E = English Version
S = Spanish Version
*Japanese Version furnished by DDK
uses DDK numbering convention.
Version Number
(Major Revision Level)