FEC Handheld Nutrunner HFC3000 - Performance

Chapter 2 Specifications
PAGE 2-3
2-2 Performance
2-2-1 Fastening Performance
Torque Accuracy
From 1/2 ~ Calibration torque
3σ/:
X
5% or less
From 1/4 ~ 1/2 Calibration torque
3σ/
X
: 6% or less
(Accuracy in the case of in-house standard fastening.
*May differ according to application.)
Angle Display (minimum)
0.1 degree
Angle (internal control)
0.1 degree
Torque Transducer accuracy
±1% of full scale
Torque Transducer linearity
±0.5% of full scale
Fastening method
Torque Method / Angle Method
Torque rate setting
Three zones
2-2-2 Controller
CPU
32-bit RISC
Data communication
・ETHERNET ：1 port
・RS232C ：1 port (Optional addition of 1 port)
・Fieldbus ：1 port (Option)
(Ethernet I/P, Devicenet, Profibus-DP V1, CC-Link, etc.)
Analog monitor function
·Torque
·Angle pulse
·Current
·Rotational speed
·Direction of rotation