FEC Handheld Nutrunner HFC3000 - Chapter 1 Outline; How to Use this Instruction Manual

Chapter 1 Outline
PAGE 1-2
1-1 How to Use This Instruction Manual
This manual describes the system structure, specifications, handling method, etc., of the Handheld
Nutrunner System.
These are described in the following order in this manual:
Chapter
Items
Contents
Chapter 1
Outline
Description of functions
Chapter 2
Specifications
General specifications of the system.
Chapter 3
System Description
Description and function of the respective parts of the system
components.
Chapter 4
Installation & Wiring
Installation procedure, dimensions, input and output signal
descriptions and requirements for PLC programming
Chapter 5
Power up and
Operational Tests
Items to be checked before power up and procedures for
operational tests.
Chapter 6
Fastening Operation
Descriptions of items displayed on the front panel and
instructions for setting the fastening parameter values.
Chapter 7
Troubleshooting
Descriptions of abnormal operation conditions during
operation and corrective actions.
Chapter 8
Options
Optional module description and setup
Chapter 9
Fieldbus I/O Interfaces
Fieldbus interface setting and functions