Chapter 8 Options
PAGE 8-2
8-1 Compact Flash (CF) Card
8-1-1 Summary
Fastening results and fastening curves can be stored as files in a Compact Flash (CF) card
(hereinafter, “memory card”). The stored data can be confirmed later by reading with a PC.
・ If an unused memory card or a memory card used in another device is to be
used, it must be formatting before using it.
●Operation-Confirmed Memory Cards
Please select a memory card of 32GB or less with reference to the following table.
●List of Number of Storable Data Sets According to Capacity
・Storage data format: Fastening results + Fastening curves (180 degrees: torque vs. angle)
[Precautions Concerning Memory Card Usage]
・Care must be taken as the data stored in a memory card may be erased under the
following conditions.
♦When a user handles a memory card incorrectly.
♦When a memory card is used or stored in an environment with static electricity or
electrical noise.
♦When a memory card sits idle/ is not used for a long period of time.
・A memory card has a limited lifetime and the stored data may become unreadable if
the card is not used for a long period of time. Be sure to back up the necessary
data in a PC, etc., periodically.
・Avoid use and storage in a location with sudden temperature change, a location
where condensation occurs, or a location exposed to direct sunlight.
・Do not bend or apply a strong shock to the memory card. Also, do not subject the
memory card to water or place it in a location of high temperature.
To Next Page
Loading...