Chapter 8 Options
PAGE 8-6
●Storage of Fastening Curves
Fastening curves are stored in the automatically-generated folder “CURVE.”
Inside the “CURVE” folder, folders, each with a name expressing the year and month, such as
“201309,” are generated automatically, and a folder is automatically generated in the manner of
“201310,” “201311,” “201312,” etc., at each turn of the month or year.
Inside the “201309” folder, folders, each with a name expressing the year, month, and day, such
as “20130901,” are generated automatically, and a folder is automatically generated in the manner
of “20130902,” “20130903,” “20130904,” etc., as the date changes.
Inside the “20130901” folder, folders, each with its name being the time of the fastening curve
that is saved first, are generated automatically in the manner of “123456~,” “123616~,” etc.
Inside the “123456~” folder, the following file is stored at the end of the fastening operation.
CURVE/YYYYMM/YYYYMMDD/hhmmss～/YYYYMMDD_hhmmss.nracd (nracd format)
40 sets of fastening curves are stored in each file. When 40 sets of fastening curves have been
stored, the next file is generated automatically inside the “20130901” folder.
Also, besides the fastening curves, “index.txt” for folder identification is generated inside
“CURVE.” The contents of index.txt are erased each time a folder is generated automatically.
To Next Page
Loading...