Transport the equipment properly according to its weight.
Failure to observe this instruction may cause injury and malfunction.
The conditions when transporting the equipment by ship are as below.
◆ Ambient temperature: -5°C ~ +55°C (Avoid freezing)
◆ Ambient humidity: 50% RH or lower (Avoid moisture)
◆ Package: Tight seal
Do not hold cables and output spindles when transporting the tools.
Failure to observe this instruction may cause injury or malfunction.
The equipment shall be stored under the following conditions.
◆ Ambient temperature: -5°C ~ +55°C (Avoid freezing)
◆ Ambient humidity: 90% RH or lower (Avoid moisture)
◆ Atmosphere: Indoors (Avoid direct sunlight)
No corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
◆ Avoid direct vibration or shocks.
Failure to meet the above conditions may cause earth leakage and malfunction.
To Next Page
Loading...