EasyManua.ls Logo

Festo MPA-S - Page 25

Festo MPA-S
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2Overview
Festo P.BE-MPA-E N 1309f English 25
All 5/2-way valves and 5/3-way mid-position valves can be used under all operating
modes:
Standard operation with one or more pressure zones
R eversible operation with compressed air supply via connections ( 3), (5) and exhaust
via port ( 1)
Low pressure operation at 0 ... 3 bar
Vacuum operation at –0.9 0 bar
Identification of the valves
The valves of the MPA-S valve terminal are marked by identification codes. By means of this identifica-
tion on the top of the valve, you can ascertain the equipment of your MPA -S valve terminal.
Ident.
code
Valve
B Piston spool valve, 5/3-way valve, mid-position open
D Piston spool valve, two monostable 2/2-way valves, normally closed, pneumatic spring
return
DS Piston spool valve, two monostable 2/2-way valves, normally closed, mechanical spring
return
E Piston spool valve, 5/3-way valve, mid-position exhausted
G Piston spool valve, 5/3-way valve, mid-position closed
H Piston spool valve, two monostable 3/2-way valves, control side 12 normally open, con-
trol side 14 norma lly closed, pneumatic spring return
HS Piston spool valve, two monostable 3/2-way valves, control side 12 normally open, con-
trol side 14 normally closed, mec hanical spring return
HU Polymer poppet valve, two monostable 3/2-way valves, c ontrol side 12 normally open,
control side 14 normally closed, mechanical spring return
I Piston spool valve, two 2/2-way valves, normally closed, pneumatic spring return
For dual-pressure operation: operating pressure at connection (1) or connection ( 5)
For vacuum operation: operating pressure via connection (1), vacuum at connection (5)
(e.g. for vacuum switching with ejector pulse)
Instructions in the sections 3.6.2 (pressure zone separation) and 3.6.6 (vacuum/low
pressure operation) and in the appendix B.1 (valve position components),
Tab. B . 1 Tab. B.4
J Piston spool valve, impulse 5/2-way valve
K Piston spool valve, two monostable 3/2-way valves, normally closed, pneumatic spring
return
KS Piston spool valve, two monostable 3/2-way valves, normally closed, mechanical spring
return
KU Polymer poppet valve, two monostable 3/2-way valves, normally closed, mechanical
spring re turn
M Piston spool valve, monostable 5/2-way valve, pneumatic spring return
MS Piston spool valve, monostable 5/2-way valve, mechanical spring return

Table of Contents

Related product manuals