2Overview
Festo – P.BE-MPA-E N – 1309f – English 19
2.3 Valve terminal design
The MPA-S valve terminal consists of the following pneumatic and electrical components. The most
impor tant components are shown in the following figure ( Fig. 2.5).
5623 4
1 32173
aA
aJ 9 aJ aJ 9 8
1 Flat plate silencer or exhaust plate
2 Blanking plate
3 Valves
4 Pressure sensor plate
5 Electrical supply plate
6 Proport io nal pressure regulator
7 Right end plate
8 Pneumatic air supply plate
9 Pressure regulator plate
aJ Sub-base
aA Multiple connector plate; AS interface, CPI
interface or port pattern
Fig. 2.5 Main components of the MPA-S valve terminal
To Next Page
Loading...
