FiberHome AN6000 Series User Manual

AN6000 Series Optical Line Terminal Equipment Hardware Description
5.9.2 GM8A
Basic Information
Refer to Card Overview for the number, power consumptions, maximum frame
length and weight of the card.
Panel Description
Table 5-22 Interfaces
Identifier
Meaning Description
1 to 8
GPON & XG-PON Combo ports
Connect to ONUs via an ODN.
Table 5-23 Indicator LEDs
Identifier
Meaning
Color Status
Description
ACT
Working
indicator LED
Green
ON
The card is working normally.
Blinking
slowly
The card is being initialized.
Blinking
quickly
The card is receiving a
configuration command from the
core switch card or the
communication between the active
and standby cards is being set up.
OFF
The card is not powered on
normally or is reset abnormally.
ALM
Alarm indicator
LED
Red
ON
The card has an urgent alarm.
OFF
The card has no urgent alarms.
LINK 1 to
8
Port status
indicator LED
Green
ON
The ONU under the PON port is
registered and authorized.
OFF
No ONU under the PON port is
registered or authorized.
Technical Specifications
See Comparison Between PON Combo Interface Cards for technical specifications
of the card.
58
Version: B

FiberHome AN6000 Series Specifications

General

Brand	FiberHome
Model	AN6000 Series
Category	Touch terminals
Language	English