FiberHome AN6000 Series User Manual

AN6000 Series Optical Line Terminal Equipment Hardware Description
5.9.3 GM8B
Basic Information
Refer to Card Overview for the number, power consumptions, maximum frame
length and weight of the card.
Panel Description
Table 5-24 Interfaces
Identifier
Meaning Description
1 to 8
GPON & XG-PON Combo ports
Connect to ONUs via an ODN.
Table 5-25 Indicator LEDs
Identifier
Meaning
Color Status
Description
ACT
Working
indicator
LED
Green
ON
The card is working normally.
Blinking
slowly
The card is being initialized.
Blinking
quickly
The card is receiving a configuration
command from the core switch card or the
communication between the active and
standby cards is being set up.
OFF
The card is not powered on normally or is
reset abnormally.
ALM
Alarm
indicator
LED
Red
ON
The card has an urgent alarm.
OFF
The card has no urgent alarms.
LINK 1 to 8
Port
status
indicator
LED
Green
ON
The ONU under the PON port is registered
and authorized.
OFF
No ONU under the PON port is registered
or authorized.
Technical Specifications
See Comparison Between PON Combo Interface Cards for technical specifications
of the card.
60
Version: B

FiberHome AN6000 Series Specifications

General

Brand	FiberHome
Model	AN6000 Series
Category	Touch terminals
Language	English