FiberHome AN6000 Series User Manual

6 Modules
Item
Specification
Transmission
distance
0.3 km 10 km 40 km 80 km
Receiving
sensitivity
-11.1 dBm OMA -14.4 dBm -15.8 dBm -24 dBm
Overload optical
power
-1 dBm 0.5 dBm -1 dBm -7 dBm
Extinction ratio 3 dB to 6 dB 3.5 dB to 6.5 dB
＞ 3 dB ＞ 9 dB
Note 1: Without the CDR function.
6.3.3 100GE Optical Module
Item
Specification
Module code
100G-10km-OLT-QSFP28
Optical module type
100G Ethernet
Wavelength
range
Channel
Minimum value (nm) Typical value (nm) Maximum value (nm)
Lane 0 1294.53 1295.56 1296.59
Lane 1 1299.02 1300.05 1301.09
Lane 2 1303.54 1304.58 1305.63
Lane 3 1308.09 1309.14 1310.19
Encapsulation mode
QSFP28
Rate 100 Gbit/s
Overall Tx optical power of
channels
≤10.5 dBm
Tx optical power of a single channel
-4.3 dBm to 4.5 dBm
Optical fiber connector type
LC
Transmission distance 10 km
Receiving sensitivity of a single
channel
-8.6 dBm
Overload optical power of a single
channel
4.5 dBm
Extinction ratio ＞ 4 dB
Version: B
81

FiberHome AN6000 Series Specifications

General

Brand	FiberHome
Model	AN6000 Series
Category	Touch terminals
Language	English