FT-70 Fill Level Inspector Service Manual
8-14
Troubleshooting Procedures
The troubleshooting procedures in this section are designed to
help you isolate machine malfunctions and determine the proper
corrective action. Once you determine the problem source, you
will be directed to the appropriate corrective procedures that are
contained in other sections of this manual.
Major Component Subsystems
System failures generally involve one or more of the following
subsystem
• Main Power Supply
• Power Transformer
• X-ray Generator
• Main Processor Card
• Serial Communications Card
• Control Panel
• Scintillation Tube or Solid State Detector (SSD)
• Sensors: Inspection Triggers, Missing Cap, High Cap, Smashed
Bottle
• Encoder
• Rejector
Before You Begin
Before you attempt any diagnostic or troubleshooting procedure:
• Read and understand the procedure(s) thoroughly.
• Understand and comply with all safety precautions.
• Have the proper diagnostic equipment on-hand.
Industrial Dynamics Company, Ltd. © 40256-0600
To Next Page
Loading...
