Fischer Panda 5000i PMS - Fuel and Coolant Specifications

Generator Tables
9.12.10 Panda_5000i_PMS_eng.R01 - Kapitel/Chapter 8: Generator Tables Seite/Page 107
API CFReplace the specification API CD since 1994
API CGEngine oil for highest demands, turbo-tested
For the Fischer Panda Generator the API CF Oil is needed.
Fig. 8.5.1-1: Temp. range of the SAE classes
8.6 Fuel
Use a clean No. 2 Diesel fuel oil (SAE J313 JUN87) according to ASTM D975 and EN 590.
Do not use alternative fuel, because its quality is unknown or it may be inferior in quality. Kerosene,
which is very low in cetane rating, adversely effects the engine.
8.7 Coolant specifications
Use a mixture of water and antifreeze. The antifreeze needs to be suitable for aluminium. The antifreeze concentra-
tion must be regularly checked in the interests of safety.
Fischer Panda recommend to use the product: GLYSANTIN PROTECT PLUS/G 48
Engine oil type
over 25°C SAE30 or SAE10W-30
SAE10W-40
0°C to 25°C SAE20 or SAE10W-30
SAE10W-40
below 0°C SAE10W or SAE10W-30
SAE10W-40
Engine coolant automotive industry Product description
Product name GLYSANTIN ® PROTECT PLUS / G48
Chemical nature Monoethylenglycol with inhibitors
Physical form Liquid
Chemical and physical properties .........................................................................................................................................................................
Reserve alkalinity of 10ml ASTM D 1121 13 – 15 ml HCl 01 mol/l