EasyManua.ls Logo

Fischer Panda 5000i PMS - PMGi 5000 Inverter Safety and Type Plate

Fischer Panda 5000i PMS
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Inverter Panda PMGi 5000
Seite 124 - Kapitel 10: Inverter Panda PMGi 5000 PGMi 5000_eng.fm
Fischer Panda Datenblatt / Datasheet
10.1 Safety instruction
The generator may not be taken into use with the cover removed.
The rotating parts (belt-pulley, belts, etc) must be covered and protected so that there is no danger to life and body!
If a sound insulation cover must be produced at the place of installation, then well-placed signs must show that the
generator can only be switched on with a closed capsule.
All servicing-, maintenance or repair work may only be carried out, when the motor is not running.
Electrical power: DANGER TO LIVE!
Electrical voltages above 48 volts (battery chargers greater
than 36 volts) are always dangerous to life). The rules of the
respective regional authority must be adhered to. Only an elec-
trician may carry out installation of the electrical connections
for safety reasons.
Before start working at the Panda i-series Generator (service,
repair ect), diconnect the starter battery (First minus cable,
then positive cable). This avoid unexpected start of the genera-
tor.
10.2 Type plate
Fig. 10.2-1: Location Type plate1. Location of the type plate
1

Table of Contents

Related product manuals