Installation Instructions
9.12.10 Panda_5000i_PMS_eng.R01 - Kapitel/Chapter 5: Installation Instructions Seite/Page 53
5. Installation Instructions
All connections (hoses, wires etc) and installation instructions are designed and suited for “standard” installation
situations.
In situations where Fischer Panda has no detailed information concerning certain installation requirements (such as
vehicle specifications, maximum vehicle speed -and all other conditions concerning special operating situations) the
installation instructions should be used as an example guide only.
The installation must be undertaken and proved by a suitable qualified/trained person and may in accordance with
the law as required by the country and special situation.
Damages caused by faulty or incorrect installation are not covered by the warranty.
5.1 Personal requirements
The described instrallation must be done by a technical trained person or a Fischer Panda service point.
5.1.1 Hazard notes for the installation
Notice!:see “Safety instructions - Safety first!” on Page 18.
Follow the general safety instruction at the front of this
manual.
Warning!: Risk of injuryrWorking at a running generator can result in severe per-
sonal injury. Therfore befor starting work at the genera-
tor:
Make shure that the generator ist stopped and the starter
battery is diconnected to guarantee that the generator cannot
be inadvertently started.
Do not run the generator with removed sound isolation cover-
Warning!: Risk of injuryr
Impropper installation can result in servere personal
injuries or material damage.
- Always undertake installation work when the generator is
switched off.
- Ensure there is sufficient installation clearance before start
working.
- Ensure tidiness and cleanliness at the workplace. Loose
components and tools lying around or on top of each other
are sources of accidents.
- Only perform installation work using commercially avalilable
tools and special tools. incorrect or damaged tools can result
injuries.
To Next Page
Loading...
