User Manual NTU Orion 2
45
• to configure the device, to control configurations (use, acknowledge), backup configurations
and restore configurations.
• to view and clear G.826 statistics for E1 and DSL.
• to view alarm statuses.
Every variable of the Nateks-MIB, as well as of other MIB files has a detailed description in the
MIB file itself.
One can receive the Nateks-MIB via the WEB interface:
http://X.X.X.X/nateks.mib.
Here, X.X.X.X is the IP-address of the device.
Figure 3.25 SNMP– “Information about the device”.
Figure 3.26. SNMP – “G.826 statistics”.
To Next Page
Loading...
