User Manual NTU Orion 2
71
ver – the number of the software version.
date – the date of the software creation.
length – the size in bytes.
CRC OK/FAIL – a label showing if the software is damaged or not.
The software status is displayed at the end of the corresponding line:
fixed – the software status: first, basic software cannot be downloaded from the console, does
not require confirmation.
just loaded – the software status: downloaded second software.
not confirmed – the software status: non-confirmed second software.
confirmed – the software status: confirmed second software.
4.6.4.16
<APPLY /ALL/NET/LINE> command
The <APPLY ALL/NET/LINE> command is used to apply changes in groups NET, VLAN or to
apply changes in one of these groups.
As a result, changed in the group are written from the new configuration into the running one.
For example:
CO_FMM>APPLY NET
Applying configuration changes in group NET to running configuration
For example:
CO_FMM>APPLY
Applying all configuration changes to running configuration
4.6.4.17 <CONFIRM> command
The <CONFIRM> command confirms the running configuration and writes it to the startup
configuration.
As a result, after confirmation of changes in all groups of configuration variables, they will be
written from the running configuration into the startup configuration.
For example:
CO_FMM>CONFIRM
Current running configuration is confirmed and written to
startup configuration in EEPROM
4.6.4.18 <BACKUP> command
The <BACKUP> command is used to create a backup of the running configuration of the device
in the EEPROM.
As a result, the running configuration is written to the backup configuration.
For example:
CO_FMM>BACKUP
Current running configuration is written to
backup configuration in EEPROM
CO_FMM>
To Next Page
Loading...
