Flintec EM100-C - Page 24

EM100-C User Manual
0084292
Page 24 of 81
GN
No Default.
N/A
Get Net Value.
GO No Default. N/A Get Peak-to-Peak Value.
GS No Default. N/A Get ADC Sample Value.
GT
No Default.
N/A
Get Tare Value.
GV
No Default.
N/A
Get Valley Value.
GW No Default. N/A Get Data String (Net, Gross, Status).
H’n’ (H0/H1)
999999.
±999999dec.
Hysteresis Set-points.
HT
Zero.
0…65535dec.
Hold-Time for All Set-Points.
HW
No Default.
N/A
Hold Weight - Broadcast Message.
IM Zero. 0000…0011bin. External Output Mask.
IN
No Default.
0000…0011bin.
External Input State.
IO
Zero.
0000…0011bin.
External Output State.
IS
No Default.
N/A
Get System Status.
IZ No Default. N/A Correction of System Zero.
MR
Zero.
0…1dec.
Set Multi-Range/Multi-Interval.
MT
Zero.
0…3000dec.
Measuring Time for Averaging (ms).
NA
1.
1…127dec.
CAN Network Address.
NR 1. 0…65535dec. No-Motion Range.
NS 1
1.
1…127dec.
CAN Network Address (as NA).
NS 2 500.
10, 20, 50, 125, 250,
500, 800, 1000dec.
CAN Network Speed (kBits/sec).
NT
1000.
0…65535dec.
No-Motion Time-Period (ms).
OF Zero. 0…3dec.
Output Format of Data String GL &
GW.
OM
Zero.
0000…0011bin.
External Output Mask.
OP
No Default.
1…255dec.
Open Communications.
RM
No Default.
N/A
Reset Peak Value.
RMV
No Default.
N/A.
Reset Tare to mV/V.
RS
No Default.
N/A
Read Serial Number.
RT
No Default.
N/A
Reset Tare.
RW
65535.
0…65535dec.
Trigger Window for Re-Trigger.
RZ
No Default.
None
Reset Zero Point.
S’n’ (S0/S1)
-999999.
±999999dec.
Set-Point Setups.
SA No Default. N/A
Send Triggered Average Value
Continuously.
SBR
Zero.
0…1dec.
RS-485 Biasing Resistor Selector.
SD
Zero.
0…65535dec.
Start Delay.
SG
No Default.
N/A
Send Gross Value Continuously.
SL No Default. N/A
Send Data String (Average, Gross,
Status) Continuously.
SMV
No Default.
N/A.
Send mV/V Value Continuously.