5500A
Operator Manual
1-6
1-7. Where To Go from Here
To locate specific information concerning the installation and operation of the 5500A
calibrator, refer to the following list:
• Unpacking and setup: Chapter 2, “Preparing for Operation”
• Installation and rack mounting: Chapter 2, “Preparing for Operation,” and the rack
mount kit instruction sheet
• AC line power and interface cabling: Chapter 2, “Preparing for Operation”
• Controls, indicators, and displays: Chapter 3, “Features”
• Front panel operation: Chapter 4, “Front Panel Operation”
• Cabling to a UUT (Unit Under Test): Chapter 4, “Front Panel Operation”
• Using the auxiliary amplifier: Chapter 4, “Front Panel Operation”
• Remote operation (IEEE-488 or serial): Chapter 5, “Remote Operation”
• Calibrating an Oscilloscope: Chapter 8, “Oscilloscope Calibration Option”
• Accessories to the 5500A Calibrator: Chapter 9, “Accessories”
• Instrument specifications: Chapter 1, “Introduction and Specifications”
1-8. Instruction Manuals
The 5500A Manual Set provides complete information for opearators and service or
maintenance technicians. The set includes:
• 5500A Getting Started Manual (PN 945159)
• 5500A Operator Reference Guide (PN 945097)
• 5500A Remote Programming Reference Guide (PN 105783)
• 5500A Operator Manual (Provided on CD-ROM or printed copy available for
purchase (PN 1628802) through the Fluke Service Department.)
• 5500A Service Manual (PN 105798)
The two reference guides and the Getting Started manual are shipped with the unit. Order
additional copies of the manuals or reference guides separately using the part number
provided. For ordering instructions, refer to the Fluke Catalog, or ask a Fluke sales
representative (see “Service Information” in Chapter 2). The Operator and Service
Manuals are both provided on the CD-ROM.
1-9. 5500A Operator Manual
This 5500A Operator Manual provides complete information for installing the 5500A
Calibrator and operating it from the front panel keys and in remote configurations. This
manual also provides a glossary of calibration, specifications, and error code information.
The Operator Manual includes the following topics:
• Installation
• Operating controls and features, including front panel operation
• Remote operation (IEEE-488 bus or serial port remote control)
• Serial port operation (printing, displaying, or transferring data, and setting up for
serial port remote control)
To Next Page
Loading...
