5500A-SC300 Option
Oscilloscope Connections
8
8-65
8-85. Oscilloscope Connections
Using the cable supplied with the Oscilloscope Calibration Option, attach the SCOPE
connector on the 5520A to one of the channel connectors on your oscilloscope (see
Figure 8-3.
To use the external trigger, attach the TRIG OUT connector on the 5520A to the external
trigger connection on your oscilloscope. To use the external trigger and view its signal
with the calibration signal, attach the TRIG OUT connector to another channel. See your
oscilloscope manual for details on connecting and viewing an external trigger.
5500A
CALIBRATOR
20V PK
MAX
HI
LO
TC
TRIG
OUT
1000V
RMS
MAX
20V
RMS
MAX
1V PK
MAX
20V PK
MAX
NORMAL
AUX
SCOPE
V, ,
RTD
A, -SENSE,
AUX V
200V PK
MAX
gl020f.eps
Figure 8-3. Oscilloscope Connection: Channel and External Trigger
To Next Page
Loading...
