5500A
Operator Manual
3-18
S
Select your temperature output defaults for the RTD type (factory default pt385) and TC
Thermocouple) type (factory default K). When an 5725A Amplifier is connected, you may
select either the 5500A Calibrator or 5725A amplifier for sourcing when each can supply
the output.
to T
to V to U
The values set here become the new limits and can be changed only with new entries or
returned to factory defaults using SETUP (see menu F).
The current values set here become the new current limits and can be changed only with new
entries or returned to factory defaults, +11,000 and -11,000, using SETUP (see menu F).
T
U
F3-04f.eps
Figure 3-4. SETUP Softkey Menu Displays (cont)
To Next Page
Loading...
