Features
Softkey Menu Trees
3
3-23
A
– typical –
– typical –
to B to C
TYPE selects the thermocouple type that you are measuring; OFFSET enters a temperature
offset; TC Menus selects more setup parameters; Meas@ TC terminal is the actual input
voltage from the thermocouple being measured.
TYPE selects the thermocouple type that you are measuring (factory default is K); REF is the
actual temperature of the reference source; REF SRC is the reference temperature, the internal
5500A Calibrator reference (intrnl) or an external reference (extrnl) (factory default is intrnl);
UNITS selects ˚C or ˚F; OpenTCD selects the open thermocouple detector feature (default on).
B
F3-06.eps
Figure 3-6. MEAS TC Softkey Menu Displays
To Next Page
Loading...
