Fluke 5700A Series II - Page 287

Appendices
Fault Codes
A
A-15
3112 A15: HV +DC Ref/Error Amplitude Fault
3113 A15: HV -DC Preamplifier Fault
3114 A15: HV -DC Series Pass & Current Fault
3115 A15: HV -DC High Voltage output Fault
3116 A15: HV -DC Reference/Error Amp Fault
3117 A14/A15: HV +DC Current Error Amp Fault
3118 A14/A15: HV -DC Current Error Amp Fault
3119 A14/A15: HV +DC Current Abs. Value
3120 A14/A15: HV -DC Current Abs. Value
3122 A14/A15: HV AC 1KHZ, Preamp Fault (lo)
3123 A14/A15: HV AC 1KHZ, Preamp Fault (mid)
3124 A14/A15: HV AC 1KHZ, Preamp Fault (hi)
3125 A14/A15: HV AC 100HZ, Preamp Fault (lo)
3126 A14/A15: HV AC 100HZ, Preamp Fault
3127 A14/A15: HV AC 100HZ, Preamp Fault (hi)
3128 A14/A15: HV AC 1KHZ, Output Fault (lo)
3129 A14/A15: HV AC 1KHZ, Output Fault (mid)
3130 A14/A15: HV AC 1KHZ, Output Fault (hi)
3131 A14/A15: HV AC 100HZ, Output Fault (lo)
3132 A14/A15: HV AC 100HZ, Output Fault (mid)
3133 A14/A15: HV AC 100HZ, Output Fault (hi)
3135 Assembly A14 Not Responding
3136 A14: 8255 Was Reset
3137 A14/A15/A16: 2.2A AC Range Mag. Fault
3138 A14/A15/A16: 2.2A AC Range Compliance
3139 A14/A15/A16: 2.2A AC Range Amplitude
3140 A14/A15/A16: 2.2A AC Range Abs. Value
3141 A14/A15/A16: 2.2A DC Range Dummy Load
3142 A14/A15/A16: 2.2A DC Range Compliance
3143 A14/A15/A16: 2.2A DC Range Magnitude