Fluke 5700A Series II - Page 79

Features
Front Panel Features 3
3-9
Table 3-1. Front Panel Features (continued)
X
Multiplier Keys
Select output value multipliers. For example, if you enter
3 3 m V, then E, the calibrator output value is 33 mV.
The multiplier keys are:
U micro (10
-6
)
m milli (10
-3
)
K kilo (10
3
)
M mega (10
6
)
Y
Numeric Keypad
Contains number keys for keying in the output amplitude and frequency, as
well as other data such as the time and date. To enter a value, press the
digits of the output value, a multiplier key if necessary, and an output
function key; then press
E. For example, for an output of 20 mV,
press 2 0 m V, then E.
Z
+
If the output function is dc voltage, current, ac voltage entered in dBm, or a
wideband output entered in dBm, pressing
+ E toggles the
polarity of the output. If the output function is ac voltage or current, pressing
+; then E changes the output to dc.
24
22
23
17
20
21
19
18
26
25
Figure 3-1. Front Panel Features (continued)