DSX-600 CableAnalyzer
Technical Reference Handbook
96
3 Press the button on one of the headset microphones or press
on the remote tester, then speak into the microphone.
When the talk function is on, shows at the top of the screen
on the main tester. On the remote tester, the TALK LED is on.
4 To adjust the volume at the main tester, press the button on
the headset’s microphone as necessary, or move the slider
control in the Talk Enabled window.
To adjust the volume at the remote tester, press or the
button on the headset’s microphone as necessary. The LEDs on
the remote show the volume level.
5 To turn off the talk function, hold down the button on one of
the headsets or hold down on the remote tester.
To Next Page
Loading...
