Fluke DSX-600 - HDTDR Analyzer Specifications for Cables <100 m (328 ft); Characteristic Impedance

DSX-600 CableAnalyzer
Technical Reference Handbook
210
HDTDR Analyzer Specifications for Cables <100 m (328 ft)
Characteristic Impedance
The tester gives an estimate of the cable's impedance at 4 m from
the start of the link. The accuracy of the measurement is relative
to a 100  terminating resistance.
Tone Generator
Generates tones that can be detected by a tone probe, such as a
Fluke Networks IntelliTone
™
probe. The tones are on all pairs. The
tone generator does not generate the IntelliTone signal.
The tone generator also turns on an inactive main or remote
DSX-600 CableAnalyzer connected to the other end of the cable.
Distance resolution 0.1 m or 1 ft
Parameter Twisted Pair Cabling
Distance accuracy  (0.3 m (1 ft) + 2 % distance)
Distance resolution 0.1 m or 1 ft
Parameter Twisted Pair Cabling
Range 70  - 180 
Accuracy ± (5  + 5 % of 100  – Measured)
Resolution 1 