Fluke DSX-600 - How to Use the Talk Function

Chapter 3: Certify Twisted Pair Cabling
How to Use the Talk Function
95
BA163.EPS
Figure 46. How to Use the Tone Generator
How to Use the Talk Function
If you have two DSX-600 testers, you can use the talk function to
talk to the person at the other end of a twisted pair link.
Note
The talk mode does not operate during tests.
To use the talk function
1 Connect the main and remote testers together through a link
that has one or more good wire pairs.
2 Connect headsets to the headset jacks on the testers.
-continued-
I
NTELLI
T
ONE
I
NTELLI
T
ONE
200 PROB
E
100 PROB
E
I
NTELLI
T
ONE
I
NTELLI
T
ONE
200 PROB
E
100 PROB
E
I
NTELLI
T
ONE
I
NTELLI
T
ONE
200 PROB
E
100 PROB
E
I
NTELLI
T
ONE
I
NTELLI
T
ONE
200 PROB
E
100 PROB
E
Tone probe
Main or remote tester
To turn on the tone
generator, press
 or tap
TOOLS > Tone Generator.