Fluke DSX-600 - About the Optional DSX-PLA001 Adapter Modules

DSX-600 CableAnalyzer
Technical Reference Handbook
14
About the Optional DSX-PLA001 Adapter Modules
The optional DSX-PLA001 Universal Permanent Link Adapter has
an interchangeable personality module. The module lets you
connect the adapter to different styles of insulation displacement
connectors (IDCs).
Figure 5 shows how to remove and install a personality module.
WCautionh
To prevent latent or immediate damage caused by
electrostatic discharge and to prevent damage to
the DSP-PMxx personality module and the socket on
the cable:
 Before you touch a personality module or
DSX-PLA001 permanent link adapter with no
module attached, touch a grounded, conductive
surface.
 Always remove the adapter from the tester before
you change the personality module.
 Always keep a personality module attached to the
adapter cable.
 Tighten the screw only with your fingers. Do not
tighten too much. Do not use tools to tighten the
screw.
 Do not touch the gold contacts on the socket or the
module.
 Always keep unused personality modules in their
original, static-protection bags.