Chapter 3: Certify Twisted Pair Cabling
Settings for Twisted Pair Tests
49
BA89.EPS
Figure 15. Reference Connections for Twisted Pair Cable
Settings for Twisted Pair Tests
Table 2 gives descriptions of the settings for twisted pair tests. To
set up a project, which includes the settings in Table 2, cable IDs,
and operator names, see Chapter 8.
To set up a twisted pair test
1 On the home screen, tap the test setup panel.
2 On the CHANGE TEST screen, select a twisted pair test to
change, then tap EDIT.
Or to set up a new twisted pair test, tap NEW TEST.
3 On the TEST SETUP screen, tap the panels to change settings
for the test. See Table 2.
-continued-
Permanent link
adapter
Channel
adapter
Channel adapters
6 inch (15 cm) reference patch cord
To Next Page
Loading...
