Fluke DSX-600 - Step 6: Save the Results; Buttons to Do Tests and Save Results

DSX-600 CableAnalyzer
Technical Reference Handbook
36
Step 6: Save the Results
6-1 Tap SAVE (if the result was PASS) or FIX LATER (if the result
was FAIL).
6-2 On the SAVE RESULT screen, tap the Cable ID box, use the
keyboard to enter an ID for the results, then tap DONE.
6-3 Tap SAVE.
Buttons to Do Tests and Save Results
When more than one button shows at the bottom of the screen, the
tester highlights one in yellow to recommend which one to tap.
Note
To change the Auto Save setting, tap the Next ID
panel on the home screen.
AQ40.EPS
Figure 13. FIX LATER, TEST AGAIN, and TEST Buttons and the TEST Key
A
B
C
D
F
E
G