Fluke DSX-600 - Manage Results on a Flash Drive

DSX-600 CableAnalyzer
Technical Reference Handbook
146
Manage Results on a Flash Drive
You can export or import results to or from a flash drive, and
delete results on the flash drive.
To export or import project settings along with results, see
“Manage Projects on a Flash Drive” on page 171.
WCaution
 Do not remove the USB flash drive while the LED on
the drive flashes. Doing so can corrupt the data on
the drive.
 You can lose a USB flash drive, cause damage to it,
or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive or that
you upload results to LinkWare Live.
Note
The tester reads only USB drives that use the FAT
format.
1 Connect a USB flash drive to the type A USB port. The tester
makes a bell sound when it detects the drive.
2 On the home screen, tap the RESULTS icon, then tap
TRANSFER.
3 On the TRANSFER RESULTS screen, tap USB Flash Drive, then
tap a function.
 Export: On the EXPORT RESULTS screen, select New or All,
select the project that contains the results you want to
export to the flash drive, then tap EXPORT.
New: Export only results that do not have the same IDs as
results that are already on the flash drive.
All: Export all results from the projects you select.