Chapter 5: Certify Coaxial Cabling
Settings for Coaxial Tests
105
Settings for Coaxial Tests
Table 5 gives descriptions of the settings for coaxial tests. To set
up a project, which includes the settings in Table 5, cable IDs,
and operator names, see Chapter 8.
To set up a coaxial test
1 On the home screen, tap the test setup panel.
2 On the CHANGE TEST screen, select a coaxial test to change,
then tap EDIT.
Or to set up a new coaxial test, tap NEW TEST.
3 On the TEST SETUP screen, tap the panels to change settings
for the test. See Table 5.
4 On the TEST SETUP screen, tap SAVE when your test setup is
completed.
5 On the CHANGE TEST screen, make sure the button next to
the test is selected, then tap USE SELECTED.
To Next Page
Loading...
