Chapter 1: Get Acquainted
Overview of Memory Functions
27
Import User Preferences from a File
You can use LinkWare PC software to make a file that contains
settings for user preferences, then you can import the file into the
tester. You can also export settings from a tester to the PC. See
the online help in LinkWare PC for instructions.
Overview of Memory Functions
You can save approximately 12,700 Cat 6A Autotest results, with
plot data included, in the DSX-600 main tester.
The capacity available for test results depends on the space used
by the software and custom test limits in the tester.
To see the memory status
On the home screen, tap the TOOLS icon, then tap Memory
Status.
To make more memory available, you can export results to a USB
flash drive, then delete the results in the tester. See “Manage
Results on a Flash Drive”on page 146.
To Next Page
Loading...
