31
Chapter 2: Get Started
WWarningX*
Before you use the tester, read the safety
information that starts on page 4.
Tutorial: Certify Twisted Pair Cabling
The tutorial in this section gives instructions on how to set up a
test to certify twisted pair cabling, do the test, and save the
results.
Figure 11 shows the minimum equipment necessary for this
tutorial.
Figure 11. Equipment for the Twisted Pair Certification Tutorial
AQ101.EPS
Main and remote DSX-600 units
Two channel adapters
Twisted pair cable
AC adapters with line cords
(optional)
A
C
D
B