Chapter 1: Get Acquainted
Set User Preferences
25
2 To go back to the home screen from the Date/Time screen,
tap two times or press .
Number Format
The tester can show decimal fractions with a decimal point (0.00)
or a comma (0,00).
1 On the home screen, tap the TOOLS icon.
2 In the Number panel, tap the control to show 0.0 or 0,0.
3 To go back to the home screen, tap or press .
Units for Length Measurements
1 On the home screen, tap the TOOLS icon.
2 In the Length panel, tap the control to show ft or m.
3 To go back to the home screen, tap or press .
Power-Down and Backlight Timeout Periods
To increase the battery life, the tester can turn off the backlight
and automatically turn off the tester when you do not press any
keys for a specified period.
When the backlight timeout period ends, the brightness of the
backlight decreases. After one more timeout period, the display
turns off. Touch the display to turn it on.
1 On the home screen, tap the TOOLS icon.
2 Tap Timeout Period, then tap Backlight or Power Down.
3 Tap a time. To always keep the backlight or tester on, tap
Disabled.
4 To go back to the home screen, tap two times or press
.
The DSX-600 remote tester turns off after 60 minutes of inactivity.
You cannot change this setting.
To Next Page
Loading...
