Fluke DSX-600 - Use an Updated Main Tester to Update Other Testers

DSX-600 CableAnalyzer
Technical Reference Handbook
194
BA46.EPS
Figure 75. How to Connect the Tester to a PC
Use an Updated Main Tester to Update Other Testers
1 Turn on both testers and connect the AC adapters to both
testers.
2 Use the USB cable provided to connect the updated main
tester to the remote or to another main. See Figure 76.
3 Follow the instructions shown on the display of the updated
main tester.
Note
If a remote has newer software than the main
tester, the main tester can install the older
software in the remote so that you can use the
two testers together. The remote cannot install
the newer software in the main tester.
Micro-AB
USB port
Type A
USB port
AC
adapter