Fluke DSX-600 - Performance Specifications; Times for a Full, 2-Way Autotest

DSX-600 CableAnalyzer
Technical Reference Handbook
204
Performance Specifications
Note
Specifications for tests on twisted pair cabling
apply to 100
 cable. For information on
measurement performance for cable with a
different impedance, contact Fluke Networks.
Times for a Full, 2-Way Autotest
Category
Autotest Time
1,2,3
Cat 5e or 6/Class D or E < 9 seconds
Cat 6A/Class E
A
10 seconds
ISO 11801 PL Class E
< 15 seconds
1. On unshielded cable. Autotests on shielded cable take approximately 0.6 seconds
longer.
2. The first Autotest after power-on takes approximately 1.5 seconds longer. If the
Autotest includes common-mode measurements, add 0.8 seconds more.
3. AC wire map function adds approximately 3 seconds to Autotest times.