Chapter 12: Specifications
Power
211
Input Protection
Protected against continuous telco voltages and 100 mA over-
current. Occasional ISDN over-voltages will not cause damage.
Power
Traceable Calibration Period
To make sure that the testers operate within the published
specifications for accuracy, have them calibrated at a Fluke
Networks authorized service center every 12 months.
Battery type Lithium ion battery pack, 7.2 V
Battery life 8 hr typical
Charge time Tester off: 4 hours to charge from 10 % capacity to 90 %
capacity.
Tester on: 6 hours to charge from 10 % capacity to 90 %
capacity with the tester on.
Power
Adapter
Input: 100 to 240 VAC ±10%, 50/60Hz
Output: 15 VDC, 2 A maximum, Class II
To Next Page
Loading...
