DSX-600 CableAnalyzer
Technical Reference Handbook
108
Or, tap MEASURE to do the length and resistance tests,
which do not require a remote tester. Because the tester
cannot complete all tests, and the reflection at the end of
the cable exceeds the 15% limit for the HDTDR test, the
result for an Autotest without a remote is always FAIL.
Figure 52. Equipment for Tests on Coaxial Cabling
Note
If you have two main testers, you can use one as a
remote. To select the remote function, tap TOOLS
> Main as Remote.
BA181.EPS
Main and remote testers
Two DSX-CHA003 adapters
For tests on network cabling:
F-connector to BNC adapters
and patch cords (typically 50 )
For tests on video cabling:
F-connector adapters and patch
cords (typically 75 )
AC adapters (optional)
A
C
B
D
E
To Next Page
Loading...
